Products

ECD
Electrochemical Detectors
LC/ECD
UHPLC with Electrochemical Detection
EC/MS
Electrochemistry with MS Detection

UHPLC Pumps

LC 110

 

LC 110S - Superior performance

 

  • Optimized for ECD applications
  • Ultra low pulsation
  • High accuracy at low µL flow rates
  • Automated piston wash
  • High pressure capability

 

The LC 110S pump is designed for lowest pulsation in combination with electrochemical detection. Consequently under optimized conditions no noise is detectable from the piston stroke. The LC 110S pump features a dual piston design and an automated piston wash to remove traces of salt and other contaminants from the backside of the pistons, increasing the lifetime of the pump seals. The pump head can deliver flow rates in the low µL/min range up to 10 mL/min.

The LC 110S pump head is available with stainless steel, titanium or ceramic inlays. These various pump head inlay materials meet the requirements of just about every application. High pressure gradient as well as flow rate programming is supported. The control software supports the programming of a quaternary high pressure gradient system.

 

Part no Description
193.0035S LC 110S pump




General specifications

Delivery system

Double-piston pump with main and auxiliary piston in a serial configuration, automatic piston back flush.

Power

Auto-sensing power supply, 90 – 260V, 47 – 63 Hz, 70 VA

Operating conditions

10– 40°C, 20 – 80% RH, non-condensing

Flow rate

0.001 – 9.999 mL/min, max 70 MPa (max rating at ≤ 5 mL/min)

Flow rate accuracy

≤ 1.5 % at 0.2 - 2 mL/min

Ripple

Residual pressure  pulsation < 3% (H20 as eluent and P = 12 MPa)

Displacement volume

primary piston 21.4 µL
secondary piston 9.7 µL

Pressure protection shut down

Minimum pressure stop: Pmin, :0 (off) - 70 MPa (FS), switch-off time 30 seconds.
Maximum pressure stop: Pmax :0.1 - 70 MPa,  switch-off time < 1  s

Operating modes

Isocratic, gradient (High Pressure, up to 4 eluents)

Instrument control

Stand alone: via Numerical keypad & LCD (2 x 24 ch) display.
Digital control: via RS232C connector (null-modem cable).
Analog control: via REMOTE connector (stop, flow, pressure, error)

GLP features

Report of number of pump cycles, working time, delivered volume and service information

Dimensions

412 (D) x 226 (W) x 135 (H) mm
16.2 “ (D) x 8.9” (W) x 5.3” (H)

Weight

5.3 kg (11.7 lbs)

Regulatory

CE, UL/CSA (LC 110S), RoHS compliant